![]() After completing it will automatically restart and will be ready for use.Once the device is powered up it will enter self configuration mode.When the update counter reaches “100%” the device will automatically restart.In the “Firmware Update” dialog box select “Yes” to start the update.Download the ***.bin file from (You may need to create an account, if you didn’t create it earlier) and copy to your microSD Card - root directory.DO NOT USE an additional source of power during firmware update! It will need to be sent back to the ATN factory for service. The device may crash, corrupting its system files. In the event of a power failure during an update. To update the new firmware you will need a microSD card and batteries that are fully charged. To receive a notification of new firmware updates, please register your device on our website (you’ll receive an email letting you know when the new firmware becomes available). If you are going to record video the microSD Card should be a Class 10 (10 Mb/sec) or faster and have capacity from 4 to 64 Gb.īefore operating your device, update the firmware to the latest version. When it pops up a few millimeters, it can be pulled with your fingers or tweezers. To remove the microSD Card from the slot, push it in using the same thin object. ![]() If you are going to record video, the microSD Card should be a Class 10 (10 Mb/s) or faster and have capacity from 4 to 64 Gb. When it pops up a few millimeters, it can be pulled with your fingers or tweezers.Make sure the device is turned off before inserting the microSD card into the slot. The device is equipped with microSD, micro USB and micro HDMI ports and can be found under the cap near the battery block (marked with appropriate icons on the cap). Make sure that the device is turned off before changing source of energy (batteries or USB in power supply mode). You want to ensure you can unscrew the cap next time you replace batteries. Make sure that the Red O-Ring is not visible to prevent shut off issues due to recoil, but also Do not over-tighten! Return the battery cap into the housing socket (screw clockwise until finger tight).Remove the battery cap by unscrewing it counter clockwise.They will provide much longer battery life. We highly recommend using lithium AA batteries. ![]() The ThOR-HD will operate on four AA-type Lithium batteries. If any accessories are missing or broken contact ATN’s Customer Service. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |